With the rapid development of intelligent transportation systems, industrial automation, and smart sensing technologies, radar-based sensing solutions are becoming increasingly important for accurate detection, measurement, and environmental perception. Among various radar technologies, 77GHz radar sensors have gained significant attention due to their high resolution, compact size, and ability to operate reliably under challenging environmental conditions....
Electrical performance consistency is critical for producing high-volume printed circuit boards (PCBs). As PCB applications move to higher frequencies, such as fifth-generation (5G) cellular wireless networks at millimeter-wave frequencies and 77 GHz automotive radar, any inconsistencies on the PCB become very noticeable, especially when the circuits operate at shorter wavelengths of millimeter-wave frequencies. There will always be...
With the rapid development of wireless communication, radar systems, automotive electronics, satellite communication, and high-speed electronic devices, PCB designs are increasingly moving toward higher frequencies and faster signal transmission speeds. Unlike conventional PCB applications, high-frequency PCB designs have stricter requirements for: Signal transmission stability Low dielectric loss Controlled impedance Thermal reliability Dimensional stability The selection...
The electronics industry has undergone many changes over the past few years. Nowadays, millimeter wave radar and millimeter wave communication frequently appear in our sight. In particular, Huawei has made remarkable achievements in 5G, and millimeter wave technology has been put on the table. Why does millimeter wave technology play such a key role in 5G and smart cars?...
There are some things in life that seem to set the standard for whatever area that you are currently involved in. Some will always compare baseball players to Jackie Robinson, while others will say that nobody could carry a tune the way that Elvis did. For me, I tend to equate the standard printed circuit...
Introduction In high-frequency and microwave PCB manufacturing, every material choice can directly influence electrical performance. While laminate selection is often considered the primary factor affecting RF performance, copper foil characteristics also play a critical role in determining: signal loss impedance stability phase consistency insertion loss long-term reliability For applications such as: 5G communication equipment automotive...
MATERIAL DESCRIPTION: RO3003, RO3003G2, RO3006 and RO3010 copper clad laminates are filled PTFE composites offering excellent thermal reliability and electrical performance over a range of dielectric constants. RO3000 series materials provide the homogeneity of properties that are expected of unreinforced materials. RO3203, RO3206, and RO3210 copper clad laminates are woven glass reinforced versions that provide...
These guidelines were developed to provide fabricators basic information on processing double-sided and multi-layered printed wiring boards (PWB’s) using RO4003C, RO4350B and RO4835 laminates. Please refer to RO4400 bondply processing guidelines for additional information on inner-layer preparation and multi-layer bonding. Storage: Fully clad RO4003C, RO4350B and RO4835 laminates should be stored at room temperature (between...
With the increasing demand for higher frequency communication, advanced radar systems, and high-speed electronic applications, PCB materials must provide stable electrical performance while maintaining reliable manufacturability. RO4003C™, RO4350B™, and RO4835™ laminates are high-frequency circuit materials developed for applications requiring low signal loss, stable dielectric properties, and improved thermal performance. These materials combine ceramic-filled hydrocarbon resin...
Rogers High Frequency Circuit Boards, Frequently, designers are concerned about temperature rise of the conductor traces on devices built in microstrip or stripline configurations on RT/duroid microwave material. The question arises when there are high bias line currents, but the bias line needs to be as narrow as possible to keep its characteristic impedance high. It...
KKPCB is a leading electronic solutions provider specializing in PCB design, fabrication, assembly, and testing for Flex, Rigid-Flex, RF/Microwave, HDI, rigid multilayer, and ATE test boards. We offer comprehensive end-to-end services, including prototyping, component sourcing, SMT/THT assembly, functional testing, enclosure assembly, and final product packaging. With our one-stop, in-house capabilities, KKPCB delivers OEM and ODM solutions with fast turnaround, high quality, and cost-effective results, serving clients worldwide.
PCB Manufacturing
PCB Assembly
Technical Support