Kingboard KB-6164 Datasheet: Lead-Free FR-4 Laminate (KB-6064) and PDF

November 21, 2026by kkpcb020
Kingboard KB-6164 is a lead-free compatible, normal-Tg FR-4 laminate from Kingboard Laminates, paired with KB-6064 prepreg. It has a 140 °C DSC Tg, a Td of 330 °C and a lower Z-axis CTE than conventional FR-4. That combination makes KB-6164 a cost-effective choice for lead-free boards in computers, instruments and consumer electronics. This page summarises the official Kingboard KB-6164 / KB-6064 technical information, explains the line-up Dk/Df data, compares KB-6164 with neighbouring Kingboard grades and shows how KKPCB builds KB-6164 PCBs. The full PDF datasheet can be downloaded at the end.

Kingboard KB-6164 FR-4 multilayer PCBs
KB-6164 suits cost-driven lead-free FR-4 boards

1. What Is Kingboard KB-6164?

KB-6164 is a glass-cloth epoxy FR-4.0 laminate that Kingboard describes as “Lead-Free / Normal Tg / Low CTE”. Its standard values follow IPC-4101E/101, the slash sheet for filled FR-4 with a minimum Tg of 110 °C. Its UL file number is E123995.

Kingboard lists these features:

  • Lead-free compatible FR-4.0 material.
  • Excellent thermal reliability – thermal stress at 288 °C of at least 240 seconds unetched.
  • Low Z-axis CTE – 3.5% expansion from 50 °C to 260 °C.
  • Good anti-CAF performance and low water absorption.

Typical applications named by Kingboard are computers and notebooks, instruments, consumer electronics and simple automotive electronics.

2. Kingboard KB-6164 Key Specifications

All values are Kingboard typical values on a 1.6 mm (8×7628) specimen. Dk and Df are measured etched, at 50% resin content.

Property IPC-TM-650 method Condition Typical value
Glass transition (Tg) 2.4.25 DSC 140 °C
Td (5% weight loss) 2.4.24.6 TGA 330 °C
Z-axis CTE, alpha 1 / alpha 2 2.4.24 — 45 / 240 ppm/°C
Z-axis expansion 2.4.24 50–260 °C 3.5%
X/Y CTE 2.4.24 40–125 °C 12 / 15 ppm/°C
T260 / T288 2.4.24.1 TMA >60 / >15 min
Thermal stress 2.4.13.1 Float 288 °C, unetched ≥240 s
Dielectric constant (Dk) 2.5.5.9 1 MHz / 1 GHz 4.8 / 4.6
Loss tangent (Df) 2.5.5.9 1 MHz / 1 GHz 0.015 / 0.016
Surface resistivity 2.5.17.1 C-96/35/90 2.2×108 MΩ
Volume resistivity 2.5.17.1 C-96/35/90 3.1×109 MΩ·cm
Dielectric breakdown 2.5.6 D-48/50+D-0.5/23 ≥45 kV
Arc resistance 2.5.1 D-48/50+D-0.5/23 125 s
CTI IEC 60112 Etched, 0.1% NH4Cl ≥175 V
Peel strength (1 oz) 2.4.8 Float 288 °C / 10 s 1.60 N/mm
Flexural strength, LW / CW 2.4.4 — 550 / 496 N/mm²
Water absorption 2.6.2.1 D-24/23 0.10%
Flammability UL94 E-24/125 V-0
Kingboard KB-6164 line-up Dk and Df by core construction
Kingboard KB-6164 core line-up: Dk and Df from 1 GHz to 10 GHz

What the Kingboard KB-6164 data means

  • Tg 140 °C, Td 330 °C: enough thermal headroom for standard lead-free reflow on boards of moderate thickness and layer count.
  • 3.5% Z-expansion: lower than conventional KB-6160 (4.3%), so plated through-holes see less stress during reflow.
  • Dk 4.6 / Df 0.016 at 1 GHz: typical FR-4 electrical properties, suited to general digital, analogue and power circuits.

3. KB-6064 Prepreg and Dk/Df by Construction

Kingboard’s KB-6164/KB-6064 line-up (Version 1.2) lists cores from 0.051 mm (1×106) to 1.499 mm (8×7628). It also lists KB-6064 prepregs in 106, 1080/1078, 1086, 3313, 2116, 1506 and 7628 glass styles. Line-up tolerances are ±0.2 for Dk and ±10% for Df.

KB-6164 core Construction Dk @ 1 / 10 GHz Df @ 1 / 10 GHz
0.051 mm (2.0 mil) 106 × 1 4.1 / 3.9 0.017 / 0.019
0.102 mm (4.0 mil) 2116 × 1 4.6 / 4.4 0.017 / 0.019
0.203 mm (8.0 mil) 7628 × 1 4.6 / 4.4 0.015 / 0.017
0.762 mm (30 mil) 7628 × 4 4.8 / 4.6 0.015 / 0.016
1.499 mm (59 mil) 7628 × 8 4.8 / 4.6 0.014 / 0.017
KB-6064 prepreg Resin content (%) Thickness (mm) Dk @ 1 GHz
106 71 / 73 / 75 0.050 / 0.053 / 0.058 4.1 / 4.0 / 3.9
1080/1078 60 / 62 / 65 / 68 0.066 / 0.071 / 0.079 / 0.086 4.3 / 4.2 / 4.2 / 4.2
2116 52 / 54 / 56 / 58 0.117 / 0.122 / 0.130 / 0.137 4.5 / 4.5 / 4.4 / 4.3
1506 44 / 46 / 48 0.150 / 0.157 / 0.165 4.7 / 4.6 / 4.5
7628 43 / 45 / 47 / 49 0.185 / 0.196 / 0.206 / 0.216 4.7 / 4.7 / 4.5 / 4.5
Kingboard KB-6164 Dk and Df vs frequency by core construction
KB-6164 Dk and Df from 1 to 10 GHz for three core constructions

Because Dk at the same frequency differs by about 0.7 between a thin, resin-rich 106 core and a thick 7628 core, KKPCB calculates controlled-impedance lines with the line-up value for each dielectric layer, not with the single 4.6 headline figure.

4. Kingboard KB-6164 vs Other KB-6160-Family Grades

Kingboard’s glass-cloth FR-4 range runs from conventional KB-6160 to high-Tg KB-6167F. The values below come from each grade’s Kingboard technical information sheet.

Property KB-6160 KB-6164 KB-6164F KB-6165 KB-6167F
Positioning Conventional FR-4, normal Tg Lead-free, normal Tg, low CTE Lead-free, Tg 140, low CTE Lead-free, Tg 150, low CTE Lead-free, Tg 170, low CTE
Tg, DSC (°C) 138 140 145 153 175
Td (°C) 310 330 340 348 356
Z-expansion 50–260 °C 4.3% 3.5% 3.4% 3.0% 2.6%
Prepreg KB-6060 KB-6064 KB-6064F KB-6065 KB-6067F
Kingboard KB-6164 vs KB-6160, KB-6164F, KB-6165 and KB-6167F chart
KB-6164 compared with other KB-6160-family grades

How to choose:

  • KB-6160 for simple boards that do not need lead-free thermal margin.
  • KB-6164 when you want lead-free compatibility and lower Z-expansion at a normal-Tg cost level.
  • KB-6164F, which Kingboard lists among its automotive materials, when you need slightly higher Tg and Td at the same class.
  • KB-6165 or KB-6167F for thicker or higher-layer-count boards and repeated reflow, where a 150 °C or 170 °C class Tg is the safer choice.

5. Processing Kingboard KB-6164: Notes from the Kingboard Guide

Kingboard’s KB-6164/KB-6064 processing guide (Version 1.2) recommends:

  • Prepreg storage: below 23 °C and 60% RH for up to 3 months, first-in-first-out, with about 12 hours of conditioning before use.
  • Inner layers: 8 hours in a temperature- and humidity-controlled room before punching and AOI, then baking at 120 °C for at least 60 minutes after oxide treatment.
  • Lamination: vacuum press at 300–400 psi, heating at 1.5–2.5 °C/min between 80 °C and 140 °C, at least 50 minutes at 180 °C or above (material temperature), and cooling slower than 3 °C/min.
  • Drilling: Kingboard publishes a speed and feed table for a 2 mm board, with up to 1,500 hits per bit for small and medium drill sizes.
  • Desmear: standard permanganate desmear works in one pass, with a target removal of 0.1–0.4 mg/cm².
  • Assembly: vacuum-packed boards should be used within 3 months and baked at 125 °C for 4–8 hours before assembly. The material is suitable for standard lead-free reflow.

6. Building Kingboard KB-6164 PCBs at KKPCB

Kingboard (KB) is one of the laminate brands listed on the KKPCB standard PCB capabilities page. When a design calls for KB-6164, KKPCB:

  • Builds the stack-up with KB-6164 cores and KB-6064 prepreg, using line-up Dk for controlled impedance. Our standard tolerance is ±5 Ω below 50 Ω and ±10% at or above 50 Ω.
  • Follows the Kingboard lamination profile and adapts drilling to the hole sizes and board thickness.
  • Reviews whether the layer count and board thickness need a higher-Tg grade, and recommends one if the thermal margin is too small.
  • Proposes equivalent grades only with your approval.

KB-6164 is a good fit for cost-driven PCB prototypes, double-sided and multilayer PCBs for consumer electronics. Compare other materials on our PCB materials page, or read the KB-6160 FR-4 laminate datasheet article for the conventional grade.

7. Download the Kingboard KB-6164 Datasheet (PDF)

The official Kingboard KB-6164 / KB-6064 technical information sheet is shown below, with the full laminate property table in English and Chinese.

Download the Kingboard KB-6164 datasheet (PDF)

The official Kingboard KB-6164/KB-6064 line-up (2 pages, English) lists Dk and Df from 1 GHz to 10 GHz for every core and prepreg construction.

Download the Kingboard KB-6164 line-up (PDF)

Source: Kingboard Laminates Holdings Ltd., KB-6164 / KB-6064 technical information. All rights to the data sheet belong to Kingboard; values are typical and for reference only.

Frequently Asked Questions

What is the Tg of Kingboard KB-6164?
Kingboard gives a DSC Tg of 140 °C for KB-6164.
What is KB-6064?
KB-6064 is the prepreg that matches KB-6164 laminate. One Kingboard data sheet covers both.
Is KB-6164 lead-free compatible?
Yes. Kingboard describes KB-6164 as a lead-free compatible FR-4.0 material with low Z-CTE and a Td of 330 °C.
What is the difference between KB-6164 and KB-6164F?
KB-6164F has a slightly higher Tg (145 °C) and Td (340 °C), and Kingboard lists it among its automotive materials. Both use the low-CTE, lead-free resin approach.
Can KKPCB use Kingboard KB-6164 for my PCB?
Yes. Kingboard is one of the laminate brands KKPCB lists in its standard capabilities. Specify KB-6164 in your fabrication notes and we will confirm availability and stack-up during quotation.

Quote Your Kingboard KB-6164 PCB with KKPCB

Send your Gerber files and stack-up to KKPCB, and our engineers will review the Kingboard KB-6164 build and the material choice before production. Contact KKPCB for a quote.

Leave a comment

Your email address will not be published. Required fields are marked *