As electronics continue to evolve, demands for high-performance, multilayer PCBs have surged. BT Epoxy PCBs (Bismaleimide-Triazine epoxy boards) have become a preferred choice for designers who need robust thermal, mechanical, and electrical performance in demanding applications. Unlike conventional FR4 boards, BT Epoxy offers superior dimensional stability, low thermal expansion, and high glass transition temperature (Tg)—critical...
In many industries, electronic systems must operate reliably under extreme conditions. Whether used in aerospace equipment, medical devices, or industrial control systems, circuit boards must deliver consistent performance without failure. This is where high reliability PCBs become essential. Unlike standard circuit boards, high reliability PCBs are specifically engineered to withstand environmental stress, electrical load, and...
What Is a Heavy Copper PCB? A Heavy Copper PCB is a printed circuit board manufactured with thicker copper layers than standard PCBs, typically ranging from 3 oz to 20 oz copper thickness or more. Unlike conventional PCBs that usually use 1 oz copper, heavy copper boards are designed to handle: High current loads Improved...
What Is an Alumina PCB? An Alumina PCB is a ceramic-based printed circuit board manufactured using aluminum oxide (Al₂O₃) as the substrate material. Unlike conventional FR4 boards, Alumina PCBs are designed for extreme temperature environments, high-power density circuits, and long-term reliability applications. With strong mechanical strength and excellent electrical insulation, Alumina PCBs are widely used...
What Is an Alumina PCB? An Alumina PCB is a printed circuit board that uses aluminum oxide (Al₂O₃) ceramic as the substrate. Known for its high thermal conductivity, excellent electrical insulation, and mechanical stability, alumina PCB is widely applied in power electronics, high-frequency devices, LED modules, and industrial automation systems. Compared to traditional FR4 or...
Introduction to UAV PCB A UAV PCB is a specialized printed circuit board engineered for unmanned aerial vehicle systems. Drones integrate flight control, power management, communication modules, GPS navigation, sensors, and imaging systems into a compact and lightweight structure. The PCB acts as the central platform that connects and coordinates all electronic subsystems while maintaining...
What Is a Heavy Copper PCB？ A Heavy Copper PCB is a printed circuit board manufactured with thick copper layers, typically 3 oz/ft² and above. In some high-power applications, copper thickness can reach 10 oz, 20 oz, or even more depending on current requirements. Unlike standard 1 oz copper PCBs, heavy copper boards are designed...
What Is a Robotics PCB? A Robotics PCB is a printed circuit board designed to support the control, sensing, communication, and power management functions of robotic systems. Unlike standard control boards, robotics PCBs must integrate multiple subsystems within limited space while maintaining electrical stability and mechanical durability. They serve as the electronic backbone of modern...
A High TG PCB refers to a printed circuit board manufactured with laminate materials that feature a high glass transition temperature, typically 170°C or above. However, in advanced electronics, High TG material selection is not only about temperature tolerance — it is fundamentally about mechanical stability under thermal stress. In multilayer, thick copper, and high-power...
What Is a Multilayer PCB? A Multilayer PCB is a printed circuit board consisting of three or more conductive copper layers laminated together with insulating dielectric materials. These layers are electrically interconnected through plated vias to create complex routing structures within a compact footprint. Compared to single-layer or double-layer boards, multilayer PCBs enable higher circuit...
KKPCB is a leading electronic solutions provider specializing in PCB design, fabrication, assembly, and testing for Flex, Rigid-Flex, RF/Microwave, HDI, rigid multilayer, and ATE test boards. We offer comprehensive end-to-end services, including prototyping, component sourcing, SMT/THT assembly, functional testing, enclosure assembly, and final product packaging. With our one-stop, in-house capabilities, KKPCB delivers OEM and ODM solutions with fast turnaround, high quality, and cost-effective results, serving clients worldwide.
PCB Manufacturing
PCB Assembly
Technical Support