HomeTag

LoRa PCB - KKPCB

When a LoRa PCB Range Test Changes After Conformal Coating

Table of Contents Why coating can change a range result Protect the antenna boundary before coating Control cleaning, masking, and cure Verify the coated assembly without false comparisons A release checklist for environmental builds A LoRa PCB can meet its bench range target and then behave differently after conformal coating, cleaning, or enclosure sealing. The...

The LoRa PCB Power Path That Keeps a Remote Sensor from Going Deaf

Table of Contents Why a quiet receiver can fail under transmit load Partition the power path before routing Keep decoupling and shielding stable through assembly Release power integrity as a production characteristic A remote node built around a LoRa PCB may pass a bench range check and then miss packets when its own transmitter, sensor...

Why a LoRa PCB Loses Sensitivity When the Gateway Ground Plane Moves

Table of Contents The gateway symptom that points to the board Freeze the antenna boundary and return path Control the connector launch and panel edge Release a repeatable gateway build A LoRa PCB gateway can appear to have a healthy radio, a valid firmware image, and a correctly tuned antenna yet lose sensitivity after the...