Modern RF and microwave systems demand circuit boards capable of maintaining signal stability at extremely high frequencies. Standard PCB materials often struggle to meet the performance requirements of radar, satellite communication, and advanced wireless technologies. The Duroid 6010 PCB is designed specifically for these demanding RF environments. Manufactured using ceramic-filled PTFE composite laminates, this material...
What Is a Duroid 6002 PCB? A Duroid 6002 PCB is a high-frequency printed circuit board made from Rogers Duroid 6002 laminates, designed for RF, microwave, and high-speed digital applications. This PCB material is known for its low dielectric constant (Dk), low dissipation factor (Df), and excellent thermal stability, making it ideal for high-frequency signal...
A Duroid 5880 PCB for radar module is widely recognized as one of the most reliable solutions for high-frequency and millimeter-wave radar systems. Radar modules operating at 24GHz, 60GHz, and 77GHz require ultra-low signal loss, stable dielectric properties, and precise impedance control to ensure accurate target detection and signal processing. RT/duroid 5880 material, developed by...
With the rapid advancement of high-frequency electronics, modern RF and microwave systems demand PCBs with ultra-low loss, stable dielectric properties, and controlled impedance performance. Applications such as 5G wireless communication, satellite systems, radar, high-frequency RF front-end modules, and microwave circuits require materials that maintain signal integrity at GHz frequencies. Duroid PCB is a PTFE-based high-frequency...
As RF and microwave technologies continue to expand into higher frequencies, the demand for ultra-low loss and highly stable PCB materials is increasing rapidly. In applications such as 5G base stations, mmWave modules, radar sensing, satellite communication, and precision antennas, even small signal losses can lead to major performance drops. Traditional FR-4 materials are often...
As RF and microwave systems continue to operate at higher frequencies and tighter tolerances, material selection becomes critical. The Duroid 6002 PCB, based on Rogers RT/duroid® 6002 laminate, is widely used in applications requiring low loss, stable electrical performance, and high reliability. A professionally manufactured Duroid 6002 PCB provides predictable behavior across wide frequency and...
As RF and microwave systems continue to push into higher frequencies, material selection becomes a critical factor in circuit performance. The Duroid 6002 PCB is widely used in high-frequency designs where low loss, tight impedance control, and thermal stability are essential. Compared with standard FR-4, Duroid 6002 offers significantly improved electrical performance for demanding RF...
As RF and microwave systems continue to move toward higher frequencies and tighter performance margins, material selection has become a critical design decision. Duroid 6002 PCB, developed by Rogers, is a high-performance laminate widely used in applications that demand low dielectric loss, excellent phase stability, and reliable high-frequency performance. A professionally manufactured Duroid 6002 PCB...
Introduction: Why Duroid 6010 PCB Is a Cornerstone of High-Frequency Engineering Rogers Duroid 6010 PCB is one of the most widely used materials for extreme high-frequency and microwave systems requiring exceptionally high dielectric constant and low loss.With a Dk of approximately 10.2, the Duroid 6010 PCB platform enables dramatic circuit miniaturization, enhanced electromagnetic coupling, and...
Duroid 6002 PCB: A Technical Deep Dive Into High-Performance Microwave & RF Substrates 1. Introduction: Why Duroid 6002 Matters As microwave, millimeter-wave, and high-frequency systems increasingly dominate applications such as automotive radar, 5G mmWave systems, satellite communication, phased-array antennas, and aerospace electronics, traditional PCB materials like FR4 fail to meet the stringent electrical and thermal...
KKPCB is a leading electronic solutions provider specializing in PCB design, fabrication, assembly, and testing for Flex, Rigid-Flex, RF/Microwave, HDI, rigid multilayer, and ATE test boards. We offer comprehensive end-to-end services, including prototyping, component sourcing, SMT/THT assembly, functional testing, enclosure assembly, and final product packaging. With our one-stop, in-house capabilities, KKPCB delivers OEM and ODM solutions with fast turnaround, high quality, and cost-effective results, serving clients worldwide.
PCB Manufacturing
PCB Assembly
Technical Support