A High Layer Count PCB is a printed circuit board with 8 or more signal layers, often extending to 20–40 layers or more in advanced systems. These boards enable dense routing, compact design, and integration of multiple high-speed and RF circuits in a single assembly. High layer count PCBs are critical in: High-performance computing Networking...
A Rigid-Flex PCB is a printed circuit board that combines rigid sections with flexible circuits into a single, integrated assembly. This design enables 3D packaging, reduced interconnects, and improved reliability in applications where traditional rigid PCBs cannot meet space or mechanical constraints. Rigid-Flex technology is essential in: Aerospace and defense electronics Medical devices Industrial automation...
A High Tg PCB is a printed circuit board designed using laminates with elevated glass transition temperatures (Tg), typically above 170°C. High Tg materials maintain mechanical integrity, dimensional stability, and electrical performance under high-temperature operations, soldering processes, and thermal cycling. High Tg PCBs are essential in applications where heat dissipation, reliability, and long-term durability are...
A TLY-5 PCB is a printed circuit board constructed using Taconic TLY-5 laminate, a ceramic-filled PTFE material optimized for high-frequency applications. TLY-5 combines low dielectric loss, stable dielectric constant, and thermal reliability, making it suitable for RF, microwave, and high-speed digital circuits. TLY-5 PCBs are widely used in: Wireless communication modules High-speed networking equipment RF...
A Satellite PCB is a printed circuit board designed for use in satellite systems and spacecraft electronics, where extreme environmental conditions and high reliability are critical. Unlike terrestrial PCBs, satellite PCBs must operate under wide temperature variations, intense radiation, vacuum, and mechanical vibration, while maintaining electrical performance over long mission durations. Satellite PCBs are employed...
A Blind Via PCB is a multilayer printed circuit board that uses vias connecting an outer layer to one or more inner layers without extending through the entire board. Unlike through-hole vias, blind vias do not penetrate all layers, allowing for high-density routing, reduced board size, and improved signal integrity. Blind via technology is critical...
A Multilayer HF PCB is a printed circuit board engineered for high-frequency signal transmission across multiple layers. Unlike standard multilayer boards, HF (high-frequency) PCBs are optimized for low dielectric loss, controlled impedance, and minimal crosstalk, enabling high-speed signal integrity in demanding applications. Multilayer HF PCBs are commonly used in: RF and microwave modules Wireless communication...
A 5G Router PCB is a high-performance printed circuit board designed to enable ultra-fast data transmission, low latency, and stable wireless connectivity in modern communication systems. Unlike traditional router boards, 5G routers must handle multi-gigabit data rates, high-frequency RF signals, and complex multi-antenna (MIMO) architectures. Typical 5G router PCB systems integrate: RF front-end modules (power...
An RF-35 PCB is a printed circuit board built using Taconic RF-35 laminate, a ceramic-filled PTFE-based material designed for high-frequency applications. With a dielectric constant of approximately 3.5 and a low dissipation factor, RF-35 provides a balance between signal performance, thermal stability, and manufacturability. Compared to standard FR-4, RF-35 significantly reduces signal loss at high...
An RO4350B PCB is a printed circuit board built using Rogers RO4350B laminate, a widely adopted high-frequency material known for its low dielectric loss, stable dielectric constant (Dk ≈ 3.48), and excellent thermal reliability. Unlike traditional PTFE-based materials, RO4350B is a hydrocarbon ceramic laminate, which combines high-frequency performance with easier manufacturability similar to standard FR-4...
KKPCB is a leading electronic solutions provider specializing in PCB design, fabrication, assembly, and testing for Flex, Rigid-Flex, RF/Microwave, HDI, rigid multilayer, and ATE test boards. We offer comprehensive end-to-end services, including prototyping, component sourcing, SMT/THT assembly, functional testing, enclosure assembly, and final product packaging. With our one-stop, in-house capabilities, KKPCB delivers OEM and ODM solutions with fast turnaround, high quality, and cost-effective results, serving clients worldwide.
PCB Manufacturing
PCB Assembly
Technical Support