As RF and microwave technologies continue to expand into higher frequencies, the demand for ultra-low loss and highly stable PCB materials is increasing rapidly. In applications such as 5G base stations, mmWave modules, radar sensing, satellite communication, and precision antennas, even small signal losses can lead to major performance drops. Traditional FR-4 materials are often...
As wireless communication, radar technology, and high-speed electronic systems continue to advance, operating frequencies are rapidly moving into the multi-gigahertz and millimeter-wave ranges. In these applications, PCB material selection becomes a critical factor affecting signal integrity, insertion loss, and overall system performance. Conventional FR-4 materials often struggle at high frequencies due to higher dielectric loss...
RO4003C PCB is a high-performance printed circuit board fabricated using Rogers RO4003C laminates, a leading low-loss material designed for high-frequency, RF, and microwave applications. Compared with conventional FR-4, RO4003C PCB provides lower dielectric loss, stable dielectric constant (Dk), and excellent controlled impedance, making it ideal for applications that require high signal integrity and minimal insertion...
A Rogers PCB is a high-performance printed circuit board manufactured using Rogers high-frequency laminate materials, which outperform standard FR-4 in RF, microwave, and high-frequency signal applications. Rogers PCB materials provide low dielectric loss, stable dielectric constant (Dk), and excellent controlled impedance, making them essential for modern high-speed electronics and wireless communication systems. As technology evolves,...
Introduction: Why Duroid 6010 PCB Is a Cornerstone of High-Frequency Engineering Rogers Duroid 6010 PCB is one of the most widely used materials for extreme high-frequency and microwave systems requiring exceptionally high dielectric constant and low loss.With a Dk of approximately 10.2, the Duroid 6010 PCB platform enables dramatic circuit miniaturization, enhanced electromagnetic coupling, and...
Duroid 6010 PCB, based on Rogers RT/duroid® 6010LM material, is one of the most critical substrates used in microwave, RF, aerospace, satellite, and defense systems. Known for its ultra-high dielectric constant (Dk ≈ 10.2) and extremely low dissipation factor, Duroid 6010 PCB enables the miniaturization of RF paths, improved resonator stability, and enhanced signal precision...
As microwave, satellite, radar, and millimeter-wave systems move deeper into high GHz operating regions, engineers require PCB materials with ultra-stable dielectric behavior, extremely high Dk, and exceptionally low loss. This is where Duroid 6010 PCB—based on Rogers RT/duroid® 6010LM—becomes a foundational choice for critical RF and microwave engineering. With a dielectric constant (Dk) of ~10.2,...
Precision mmWave routing networks—operating from 26 GHz to beyond 90 GHz—demand exceptional electromagnetic uniformity, controlled impedance, and stable mode behavior to maintain system linearity. RT/duroid 5880 PCB materials have become a foundational high-frequency laminate for mmWave architectures because their ultra-low dielectric constant (Dk ≈ 2.20), extremely low dissipation factor (Df ≈ 0.0009), and isotropic PTFE...
High-Q RF filters operating in microwave, mmWave, radar, and satellite communication systems demand exceptionally stable phase behavior and predictable wideband propagation. Rogers 5880 PCB laminates have become a preferred high-frequency substrate because their ultra-low dielectric constant (Dk 2.20) and extremely low dissipation factor (Df 0.0009) enable ultra-flat phase response, low-loss signal transmission, and coherent filter...
TLY-5 PCB materials have become a core enabler in modern high-frequency electronics, especially as RF, microwave, and mmWave systems continue pushing toward higher bandwidth, lower loss, and stricter phase-stability requirements. Built on a PTFE-based low-loss dielectric platform, TLY-5 PCBs deliver exceptionally high electrical performance while supporting the reliability demands of satellite payloads, radar front-ends, high-power...
KKPCB is a leading electronic solutions provider specializing in PCB design, fabrication, assembly, and testing for Flex, Rigid-Flex, RF/Microwave, HDI, rigid multilayer, and ATE test boards. We offer comprehensive end-to-end services, including prototyping, component sourcing, SMT/THT assembly, functional testing, enclosure assembly, and final product packaging. With our one-stop, in-house capabilities, KKPCB delivers OEM and ODM solutions with fast turnaround, high quality, and cost-effective results, serving clients worldwide.
PCB Manufacturing
PCB Assembly
Technical Support