HomeTag

conformal coating - KKPCB

How a Smart Home PCB Survives Panelization and Selective Coating

A Smart Home PCB may be electrically correct and still lose yield when it is released as a panel. Sensor vents, tooling rails, fiducials, connector edges, and coating masks all compete for the same millimeters. The release decision is not simply “can the board be routed?” It is whether the panel can be assembled, separated,...

Why an IoT Sensor PCB Drifts After Coating and Humidity Exposure

Table of Contents Why environment becomes a signal problem Design coating and sensor keep-outs together Build a repeatable qualification path Release evidence for field service An environmental sensor can be electrically correct on the bench and still drift after weeks of humidity, condensation, cleaning, and temperature cycling. The enclosure, coating, vent, connector, and copper pattern...

When a LoRa PCB Range Test Changes After Conformal Coating

Table of Contents Why coating can change a range result Protect the antenna boundary before coating Control cleaning, masking, and cure Verify the coated assembly without false comparisons A release checklist for environmental builds A LoRa PCB can meet its bench range target and then behave differently after conformal coating, cleaning, or enclosure sealing. The...

When a Zigbee PCB Drifts After Humidity, Cleaning, and Conformal Coating

Table of Contents Why a stable radio drifts after environmental processing Control moisture, residues, and the antenna boundary Design the coating process around RF and test access Release evidence for production and field support A Zigbee PCB can pass a clean-room range check and still drift after humidity exposure, aqueous cleaning, or conformal coating. Engineers...