
1. What Is Kingboard KB-6164?
KB-6164 is a glass-cloth epoxy FR-4.0 laminate that Kingboard describes as “Lead-Free / Normal Tg / Low CTE”. Its standard values follow IPC-4101E/101, the slash sheet for filled FR-4 with a minimum Tg of 110 °C. Its UL file number is E123995.
Kingboard lists these features:
- Lead-free compatible FR-4.0 material.
- Excellent thermal reliability – thermal stress at 288 °C of at least 240 seconds unetched.
- Low Z-axis CTE – 3.5% expansion from 50 °C to 260 °C.
- Good anti-CAF performance and low water absorption.
Typical applications named by Kingboard are computers and notebooks, instruments, consumer electronics and simple automotive electronics.
2. Kingboard KB-6164 Key Specifications
All values are Kingboard typical values on a 1.6 mm (8×7628) specimen. Dk and Df are measured etched, at 50% resin content.
| Property | IPC-TM-650 method | Condition | Typical value |
|---|---|---|---|
| Glass transition (Tg) | 2.4.25 | DSC | 140 °C |
| Td (5% weight loss) | 2.4.24.6 | TGA | 330 °C |
| Z-axis CTE, alpha 1 / alpha 2 | 2.4.24 | — | 45 / 240 ppm/°C |
| Z-axis expansion | 2.4.24 | 50–260 °C | 3.5% |
| X/Y CTE | 2.4.24 | 40–125 °C | 12 / 15 ppm/°C |
| T260 / T288 | 2.4.24.1 | TMA | >60 / >15 min |
| Thermal stress | 2.4.13.1 | Float 288 °C, unetched | ≥240 s |
| Dielectric constant (Dk) | 2.5.5.9 | 1 MHz / 1 GHz | 4.8 / 4.6 |
| Loss tangent (Df) | 2.5.5.9 | 1 MHz / 1 GHz | 0.015 / 0.016 |
| Surface resistivity | 2.5.17.1 | C-96/35/90 | 2.2×108 MΩ |
| Volume resistivity | 2.5.17.1 | C-96/35/90 | 3.1×109 MΩ·cm |
| Dielectric breakdown | 2.5.6 | D-48/50+D-0.5/23 | ≥45 kV |
| Arc resistance | 2.5.1 | D-48/50+D-0.5/23 | 125 s |
| CTI | IEC 60112 | Etched, 0.1% NH4Cl | ≥175 V |
| Peel strength (1 oz) | 2.4.8 | Float 288 °C / 10 s | 1.60 N/mm |
| Flexural strength, LW / CW | 2.4.4 | — | 550 / 496 N/mm² |
| Water absorption | 2.6.2.1 | D-24/23 | 0.10% |
| Flammability | UL94 | E-24/125 | V-0 |

What the Kingboard KB-6164 data means
- Tg 140 °C, Td 330 °C: enough thermal headroom for standard lead-free reflow on boards of moderate thickness and layer count.
- 3.5% Z-expansion: lower than conventional KB-6160 (4.3%), so plated through-holes see less stress during reflow.
- Dk 4.6 / Df 0.016 at 1 GHz: typical FR-4 electrical properties, suited to general digital, analogue and power circuits.
3. KB-6064 Prepreg and Dk/Df by Construction
Kingboard’s KB-6164/KB-6064 line-up (Version 1.2) lists cores from 0.051 mm (1×106) to 1.499 mm (8×7628). It also lists KB-6064 prepregs in 106, 1080/1078, 1086, 3313, 2116, 1506 and 7628 glass styles. Line-up tolerances are ±0.2 for Dk and ±10% for Df.
| KB-6164 core | Construction | Dk @ 1 / 10 GHz | Df @ 1 / 10 GHz |
|---|---|---|---|
| 0.051 mm (2.0 mil) | 106 × 1 | 4.1 / 3.9 | 0.017 / 0.019 |
| 0.102 mm (4.0 mil) | 2116 × 1 | 4.6 / 4.4 | 0.017 / 0.019 |
| 0.203 mm (8.0 mil) | 7628 × 1 | 4.6 / 4.4 | 0.015 / 0.017 |
| 0.762 mm (30 mil) | 7628 × 4 | 4.8 / 4.6 | 0.015 / 0.016 |
| 1.499 mm (59 mil) | 7628 × 8 | 4.8 / 4.6 | 0.014 / 0.017 |
| KB-6064 prepreg | Resin content (%) | Thickness (mm) | Dk @ 1 GHz |
|---|---|---|---|
| 106 | 71 / 73 / 75 | 0.050 / 0.053 / 0.058 | 4.1 / 4.0 / 3.9 |
| 1080/1078 | 60 / 62 / 65 / 68 | 0.066 / 0.071 / 0.079 / 0.086 | 4.3 / 4.2 / 4.2 / 4.2 |
| 2116 | 52 / 54 / 56 / 58 | 0.117 / 0.122 / 0.130 / 0.137 | 4.5 / 4.5 / 4.4 / 4.3 |
| 1506 | 44 / 46 / 48 | 0.150 / 0.157 / 0.165 | 4.7 / 4.6 / 4.5 |
| 7628 | 43 / 45 / 47 / 49 | 0.185 / 0.196 / 0.206 / 0.216 | 4.7 / 4.7 / 4.5 / 4.5 |

Because Dk at the same frequency differs by about 0.7 between a thin, resin-rich 106 core and a thick 7628 core, KKPCB calculates controlled-impedance lines with the line-up value for each dielectric layer, not with the single 4.6 headline figure.
4. Kingboard KB-6164 vs Other KB-6160-Family Grades
Kingboard’s glass-cloth FR-4 range runs from conventional KB-6160 to high-Tg KB-6167F. The values below come from each grade’s Kingboard technical information sheet.
| Property | KB-6160 | KB-6164 | KB-6164F | KB-6165 | KB-6167F |
|---|---|---|---|---|---|
| Positioning | Conventional FR-4, normal Tg | Lead-free, normal Tg, low CTE | Lead-free, Tg 140, low CTE | Lead-free, Tg 150, low CTE | Lead-free, Tg 170, low CTE |
| Tg, DSC (°C) | 138 | 140 | 145 | 153 | 175 |
| Td (°C) | 310 | 330 | 340 | 348 | 356 |
| Z-expansion 50–260 °C | 4.3% | 3.5% | 3.4% | 3.0% | 2.6% |
| Prepreg | KB-6060 | KB-6064 | KB-6064F | KB-6065 | KB-6067F |

How to choose:
- KB-6160 for simple boards that do not need lead-free thermal margin.
- KB-6164 when you want lead-free compatibility and lower Z-expansion at a normal-Tg cost level.
- KB-6164F, which Kingboard lists among its automotive materials, when you need slightly higher Tg and Td at the same class.
- KB-6165 or KB-6167F for thicker or higher-layer-count boards and repeated reflow, where a 150 °C or 170 °C class Tg is the safer choice.
5. Processing Kingboard KB-6164: Notes from the Kingboard Guide
Kingboard’s KB-6164/KB-6064 processing guide (Version 1.2) recommends:
- Prepreg storage: below 23 °C and 60% RH for up to 3 months, first-in-first-out, with about 12 hours of conditioning before use.
- Inner layers: 8 hours in a temperature- and humidity-controlled room before punching and AOI, then baking at 120 °C for at least 60 minutes after oxide treatment.
- Lamination: vacuum press at 300–400 psi, heating at 1.5–2.5 °C/min between 80 °C and 140 °C, at least 50 minutes at 180 °C or above (material temperature), and cooling slower than 3 °C/min.
- Drilling: Kingboard publishes a speed and feed table for a 2 mm board, with up to 1,500 hits per bit for small and medium drill sizes.
- Desmear: standard permanganate desmear works in one pass, with a target removal of 0.1–0.4 mg/cm².
- Assembly: vacuum-packed boards should be used within 3 months and baked at 125 °C for 4–8 hours before assembly. The material is suitable for standard lead-free reflow.
6. Building Kingboard KB-6164 PCBs at KKPCB
Kingboard (KB) is one of the laminate brands listed on the KKPCB standard PCB capabilities page. When a design calls for KB-6164, KKPCB:
- Builds the stack-up with KB-6164 cores and KB-6064 prepreg, using line-up Dk for controlled impedance. Our standard tolerance is ±5 Ω below 50 Ω and ±10% at or above 50 Ω.
- Follows the Kingboard lamination profile and adapts drilling to the hole sizes and board thickness.
- Reviews whether the layer count and board thickness need a higher-Tg grade, and recommends one if the thermal margin is too small.
- Proposes equivalent grades only with your approval.
KB-6164 is a good fit for cost-driven PCB prototypes, double-sided and multilayer PCBs for consumer electronics. Compare other materials on our PCB materials page, or read the KB-6160 FR-4 laminate datasheet article for the conventional grade.
7. Download the Kingboard KB-6164 Datasheet (PDF)
The official Kingboard KB-6164 / KB-6064 technical information sheet is shown below, with the full laminate property table in English and Chinese.
Download the Kingboard KB-6164 datasheet (PDF)
The official Kingboard KB-6164/KB-6064 line-up (2 pages, English) lists Dk and Df from 1 GHz to 10 GHz for every core and prepreg construction.
Download the Kingboard KB-6164 line-up (PDF)
Source: Kingboard Laminates Holdings Ltd., KB-6164 / KB-6064 technical information. All rights to the data sheet belong to Kingboard; values are typical and for reference only.
Frequently Asked Questions
What is the Tg of Kingboard KB-6164?
What is KB-6064?
Is KB-6164 lead-free compatible?
What is the difference between KB-6164 and KB-6164F?
Can KKPCB use Kingboard KB-6164 for my PCB?
Quote Your Kingboard KB-6164 PCB with KKPCB
Send your Gerber files and stack-up to KKPCB, and our engineers will review the Kingboard KB-6164 build and the material choice before production. Contact KKPCB for a quote.

