Uncategorized - KKPCB

RT-Duroid® 5880 ist ein Hochleistungs-Laminat aus PTFE-Verbundwerkstoffen, das in Hochfrequenz- und Mikrowellenanwendungen weit verbreitet ist. Dieses Sicherheitsdatenblatt enthält wichtige Informationen zur sicheren Handhabung, Lagerung und Entsorgung. 1. Produktidentifikation Produktname: RT-Duroid® 5880 Laminat Chemische Zusammensetzung: PTFE (Polytetrafluorethylen) mit Glasfaserverstärkung Verwendung: Hochfrequenz- und Mikrowellen-Schaltungsmaterial Hersteller: Rogers Corporation 2. Gefahrenidentifikation Klassifizierung Physikalische Gefahren: Nicht brennbar bei normalen Temperaturen. Kann jedoch bei sehr hohen Temperaturen...

RT-Duroid® 5880 is a PTFE-based composite laminate reinforced with fiberglass, designed for high-frequency applications. This safety data sheet provides essential information for safe handling, storage, and disposal. 1. Product Identification Product Name: RT-Duroid® 5880 Laminates Chemical Composition: PTFE (polytetrafluoroethylene) with fiberglass reinforcement Use: Material for high-frequency and microwave circuits Manufacturer: Rogers Corporation 2. Hazard Identification Hazard Classification Physical Hazards: Non-flammable at room temperature but...

The RT-Duroid 5870-5880 laminates, made from glass microfiber-reinforced PTFE, offer a nearly isotropic dielectric constant, which provides several key advantages for high-frequency circuit applications. Here’s why this is beneficial: 1. Reduced Signal Deformation Nearly isotropic dielectric constant means the material’s electrical properties (permittivity) are very uniform in all directions. In typical PCB laminates, the dielectric constant can vary slightly depending...

RT-Duroid laminates, including PTFE-based composites like RT-Duroid 5870 and 5880, are widely used in high-frequency applications due to their excellent dielectric properties. However, in specialized environments such as space exploration, nuclear facilities, or medical applications involving ionizing radiation, understanding the impact of nuclear radiation on these materials is crucial. 1. Radiation Effects on PTFE-Based Materials PTFE...

The RO4000® series laminates, including RO4003C™, RO4350B™, and RO4835™, are high-performance materials designed for RF and microwave applications. They combine superior electrical properties with processability similar to traditional FR-4 materials. Below are the recommended fabrication guidelines for achieving optimal performance and reliability. 1. Material Overview RO4003C™: Low-loss, glass-reinforced hydrocarbon/ceramic laminate with properties close to PTFE-based materials. RO4350B™: Enhanced version with...

The RO4000® Series Laminates, including RO4003C™, RO4350B™, and RO4835™, are high-performance circuit materials designed for RF, microwave, and high-speed digital applications. This document outlines product details, safety information, and usage considerations. 1. Product Overview Material Composition: Glass-reinforced hydrocarbon/ceramic composite. Designed to offer low loss and superior performance at high frequencies. Variants: RO4003C™: Known for excellent electrical properties and ease...

These high-performance laminates from the RO4000® Series are designed for ease of fabrication using standard PCB manufacturing techniques. Follow these guidelines to ensure optimal performance and reliability. 1. Material Overview Property RO4003C™ RO4350B™ RO4835™ Dielectric Constant (Dk) ~3.38 @ 10 GHz ~3.48 @ 10 GHz ~3.48 @ 10 GHz Loss Tangent (Df) ~0.0027 ~0.0037 ~0.0033 Thermal Stability Moderate High...

RO4000® Series Laminates are high-performance, cost-effective materials engineered for RF, microwave, and high-speed digital applications. This data sheet outlines the electrical, mechanical, and thermal properties of RO4003C™ and RO4350B™, enabling informed material selection and application design. 1. Product Overview Property RO4003C™ RO4350B™ Material Composition Glass-reinforced hydrocarbon/ceramic Glass-reinforced hydrocarbon/ceramic Dielectric Constant (Dk) 3.38 ± 0.05 (10 GHz) 3.48 ± 0.05...

The integration of RO4000® Series Laminates with TICER® TCR Thin Film Resistor Foils offers a streamlined solution for manufacturing high-performance RF, microwave, and mixed-signal circuits. This combination provides excellent electrical and thermal stability while supporting embedded resistive elements for advanced circuit designs. 1. Product Overview Laminate Type RO4003C™ RO4350B™ Material Composition Glass-reinforced hydrocarbon/ceramic Glass-reinforced hydrocarbon/ceramic Resistor Foil Type TICER®...

Rogers Corporation provides high-quality resistive foils, such as TICER® TCR thin-film resistor foils, as part of its laminate offerings. These foils are designed for applications requiring precision resistive elements in high-frequency, RF, and microwave circuits. The following statement clarifies the expectations for the visual appearance and electrical performance of resistive foils. 1. Visual Appearance of Resistive...